A series of mesoporous carbonaceous materials were synthesized by the nanocasting technique using boehmite as a template and glucose as a carbon precursor. After pyrolysis and template removal, the resulting material is a mesoporous carbon that can be additionally doped with N, B and K during prepyrolysis impregnation. In addition, the...
-
October 11, 2022 (v1)PublicationUploaded on: March 24, 2023
-
November 16, 2018 (v1)Publication
The use of waste materials generated by construction and demolition industry to yield valuable glassy materials, i.e. enamel for glazed ceramic tiles and cellular glasses is presented in this study. Both types of materials are produced by one-step treatment at moderate temperatures after simple waste chemical composition adjust. The enamels are...
Uploaded on: March 27, 2023 -
April 20, 2023 (v1)Publication
Formic acid has recently been revealed to be an excellent hydrogen carrier, and interest in the development of efficient and selective catalysts towards its dehydrogenation has grown. This reaction has been widely explored using homogeneous catalysts; however, from a practical and scalable point of view, heterogeneous catalysts are usually...
Uploaded on: April 23, 2023 -
February 11, 2019 (v1)Publication
This work reports the synthesis and characterization of a cerium phosphate supported gold catalyst as well as its catalytic activity for the oxidation of CO. A precipitation method in the presence of an organic modifier followed by a hydrothermal treatment was used for the support synthesis, resulting in high surface area nanometric particles....
Uploaded on: March 27, 2023 -
April 25, 2018 (v1)Publication
The effect of cerium and/or gold addition to a manganese oxide which was greatly active in CO oxidation was studied. The catalysts obtained by this way were characterized by N2 adsorption, XRF, XRD and TPR, and their catalytic activity was measured in the CO oxidation reaction. The pure MnOx catalyst was active in the CO oxidation but the...
Uploaded on: December 4, 2022 -
April 14, 2023 (v1)Publication
Active and selective structured RuO2/Al2O3 catalysts for CO methanation using a flow simulating CO2-rich reformate gases from WGS and PROX units (H2 excess, CO2 presence and 300 ppm CO concentration) were prepared. Both, the RuO2/Al2O3 powder and the slurry prepared from it for its structuration by washcoating of the metallic micromonolithic...
Uploaded on: April 15, 2023 -
February 26, 2018 (v1)Publication
Ceria-based gold catalysts were successfully deposited on ferritic stainless steel (Fecralloy) and aluminium monoliths. The prepared monolithic and reference powder catalysts were characterized by means of S BET, X-ray diffraction, glow discharge optical emission spectroscopy and scanning electron microscopy-energy dispersive X-ray analysis...
Uploaded on: March 27, 2023 -
August 3, 2023 (v1)Publication
Different metal halide catalysts supported on a commercial active charcoal have been synthesized, activated, characterized and tested in glucose dehydration to 5-hydroxymethylfurfural using a biphasic water/methyl isobutyl ketone media. The influence of the cation nature (K+, Ca2+, Sr2+, Mg2+) and anion nature (F-, Cl-, Br-) on the catalytic...
Uploaded on: October 18, 2023 -
April 14, 2023 (v1)Publication
Active and selective structured RuO2/Al2O3 catalysts for CO methanation using a flow simulating CO2-rich reformate gases from WGS and PROX units (H2 excess, CO2 presence and 300 ppm CO concentration) were prepared. Both, the RuO2/Al2O3 powder and the slurry prepared from it for its structuration by washcoating of the metallic micromonolithic...
Uploaded on: April 15, 2023 -
December 19, 2022 (v1)Publication
A series of functionalized nanographitic carbons is prepared, characterized and tested in fructose dehydration reaction to 5-hydroxymethylfurfural. The functionalization treatment was selected to introduce various Brönsted acid sites and to modify the textural and catalytic properties of the initial carbon material. Within the series, the...
Uploaded on: March 24, 2023 -
November 16, 2018 (v1)Publication
In this work, a structured monolithic catalyst has been tested under a wide range of conditions (partial pressure, residence time, temperature and time-on-stream), with the aim of modeling its kinetic behavior and assessing its economic and upscaling potential. We have developed a sequential model to help us interpret both main trends and...
Uploaded on: March 27, 2023 -
January 11, 2024 (v1)Publication
In this work ruthenium based catalysts are tested as catalytic systems for the selective oxidation of levulinic to succinic acid. Very different in nature supports have been chosen in order to elucidate the effect of their textural and acidic properties on the final catalytic activity. The influence of Ru particle size is also discussed and...
Uploaded on: January 13, 2024 -
October 20, 2022 (v1)Publication
One of the most remarkable benefits of the microreactors is the achievement of more efficient processes by enhancing the heat and mass transfer phenomena, which is the key factor for processes intensification in chemical reactions, resulting in higher conversion, selectivity and yield towards desired products. Currently, the entire scenario of...
Uploaded on: December 4, 2022