HENRIQUES , M.

The aim of this study was to verify the possible physical and chemical changes that may occur on the surface of Ag–TiCN coatings after exposure to the culture media used in microbiological and cytotoxic assays, respectively tryptic soy broth (TSB) and Dulbecco's modified eagle's medium (DMEM). After sample immersion for 24 h in the media,...

Nowadays, antibacterial properties are becoming a viable feature to be introduced in biomaterials due to the possibility of modifying the materials' surface used in medical devices in a micro/nano metric scale. As a result, it is mandatory to understand the mechanisms of the antimicrobial agents currently used and their possible failures. In...

Nowadays, with the increase of elderly population and related health problems, knee and hip joint prosthesis are being widely used worldwide. However, failure of these invasive devices occurs in a high percentage thus demanding the revision of the chirurgical procedure. Within the reasons of failure, microbial infections, either hospital or...

Ti–Si–C–ON films were deposited by DC reactive magnetron sputtering using different partial pressure ratio of oxygen (pO2) and nitrogen (pN2). Compositional analysis revealed the existence of three different growth zones for the films; (I) N/Ti = 2.1 (high atomic ratio) and low oxygen content; (II) 0.76 < N/Ti < 2.1 (intermediate atomic ratio)...

Ti–Si–C–ON films were deposited by DC reactive magnetron sputtering using different partial pressure of oxygen (pO2) and nitrogen (pN2) ratio. Compositional analysis revealed the existence of two different growth zones for the films; one zone deposited under low pO2/pN2 and another zone deposited under high pO2/pN2. The films produced under low...

Ti–Si–C–ON films were deposited by DC reactive magnetron sputtering and their chemical properties, biofilm formation and toxicity were characterized. Based on the films composition three different growth regimes were identified on the films; (I) N/Ti = 2.11 (high atomic ratio) and low oxygen content; (II) 0.77 ≤ N/Ti ≤ 1.86 (intermediate atomic...

Detailed structural, microstructural, biofilm formation and cytotoxicity studies were performed on Ti–Si–C–ON hard coatings prepared by DC reactive magnetron sputtering, in order to evaluate the relation among these properties. Compositional analysis showed the existence of two distinct regimens; regime I: high C/Si atomic ratio (C/Si ≥ 1.42)...

urface modification of bulk materials used in biomedical applications has become an important prerequisite for better biocompatibility. In particular, to overcome the particle generation, low-wear coatings based on carbon (nitrogen) and containing antimicrobial elements such as silver are promising candidates. Thus, the present work explores...