HORWAT , D.

In this study, we have successfully used the extended X-ray absorption fine structure (EXAFS) technique at the Ti-K edge to extract the local structure in a set of nanocomposite TiBC/a-C coatings deposited by a combined d.c.-pulsed and r.f.-magnetron sputtering deposition process. The sequence of Fourier transform spectra in the deposited films...

Aluminium doped zinc oxide thin films (4 at.% Al) were deposited by reactive magnetron sputtering technique and characterized by X-ray diffraction (XRD), Rutherford backscattering spectroscopy (RBS), four point probe technique and optical spectrophotometry. High heterogeneities were observed as a function of sample position in the chamber. The...

Silver-containing diamond-like-carbon (DLC) is a promising material for biomedical implants due to its excellent combination of antibacterial and mechanical properties. In this work, a dual-cathode pulsed filtered cathodic arc source containing silver and graphite rods was employed in order to obtain DLC samples with various silver contents....

Transparent Al-doped ZnO thin films were deposited by reactive magnetron sputtering with different oxygen flow rates. The electronic resistivity, measured by the 4 point-probe method, is very sensitive to the sample position relative to the magnetron axis: the closer the magnetron from the axis the higher the resistivity. This is more...

Considering it is somewhat difficult to crystallize thermochromic nickelates through a soft process, a major challenge in NdNiO3 crystallization is the stabilization of the Ni3+ oxidation state against Ni2+. The aim of the present work was to understand why a soft annealing is sufficient while an oxygen high pressure (200 bar) is usually...