LLOREDA JURADO , Pedro Javier

Hoy en día, las espumas despiertan interés gracias al sin fin de aplicaciones que ofrecen en variados campos debido principalmente a la versatilidad de propiedades físicas, químicas, mecánicas, e incluso catalíticas, que presentan en función de la cantidad, tamaño y morfología de su porosidad, así como la naturaleza del material que la...

The aim of this work was to study the effect of the particle size range, the freeze casting temperature and sintering temperature on the capillarity performance and mechanical properties of Ni wicks manufactured by freeze-casting. The use of Ni/camphene-polystyrene suspensions creates wicks with an open porosity above 80% and average pore sizes...

Porous materials manufactured by freeze-casting are demonstrating potential application as oxygen carriers for the production and purification of hydrogen, or anode material for lithium-ion batteries. However, to obtain the required pore morphology and sufficient mechanical strength, the suspension processing parameters must be controlled....

Wicks are the main component of Loop Heat Pipe systems, whereby coolant liquid flow through their porous structure. They are usually formed by a primary wick to produce liquid transportation by capillary force, and a secondary wick that is continuously wetted by the liquid coolant. Traditionally, the two wicks are manufactured separately and...

Hydrogen is the next energy vector for a decarbonization society but industrial production is still methane-based. The Steam Iron Process (SIP) could provide a carbon-free production and safety storage option. Here, we show that a Fe2O3-3 wt% of Al2O3 foams created by freeze-casting withstand 10 redox cycles at different temperatures with no...

Chemical looping water splitting systems operate at relatively high temperatures (450–800 °C) to produce, purify, or store hydrogen by the cyclic reduction and oxidation (redox) of a solid oxygen carrier. Therefore, to improve long-term operation, it is necessary to develop highly stable oxygen carriers with large specific surface areas. In...

Hydrogen is the ideal energy vector to reduce our fossil-fuels dependency and diminish the climate change consequence. However, current production is still methane based. It is possible to produce hydrogen using bioethanol from the alcoholic fermentation of organic waste by chemical looping processes, but unfortunately current redox systems...

In this work, a blend of Ti, Nb, and Mn powders, with a nominal composition of 15 wt.% of Mn, and balanced Ti and Nb wt.%, was selected to be mechanically alloyed by the following two alternative high-energy milling devices: a vibratory 8000D mixer/mill® and a PM400 Retsch® planetary ball mill. Two ball-to-powder ratio (BPR) conditions (10:1...