No description
-
April 27, 2021 (v1)PublicationUploaded on: December 4, 2022
-
May 20, 2019 (v1)Publication
En la presente comunicación se desarrolla una experiencia de innovación docente en la explicación del enlace químico por diferentes teorías. El modelo pedagógico implementado se basó en la interpretación y discusión en grupo de las diferentes teorías que explican el enlace entre los átomos. Se partió de los conocimientos previos de los...
Uploaded on: December 4, 2022 -
June 19, 2020 (v1)Publication
No description
Uploaded on: December 4, 2022 -
August 8, 2022 (v1)Publication
Usually, smectite clays, which are used for catalytic purposes, are subjected to chemical and thermochemical treatments to enhance their surface features. This research aims to analyze textural and structural features of the physical mixtures of two Colombian smectite clays at room temperature and after the treatment at 600°C, 800°C, and...
Uploaded on: March 25, 2023 -
April 11, 2018 (v1)Publication
The effect of ruthenium on the physico-chemical properties of CeZr and CeZrCo mixed oxides for H2 production by glycerol steam reforming reaction has been studied. The combination of in situ Raman spectroscopy under both reductive and oxidative conditions, H2/O2 pulses and XRD, Raman, BET analysis, H2-TPR and TPD-TPO analyses contributed to the...
Uploaded on: March 27, 2023 -
March 23, 2018 (v1)Publication
Raman spectroscopic technique has been used to characterize a Ru/TiO2 catalyst and to follow in situ their structural changes during the CO selective methanation reaction (S-MET). For a better comprehension of the catalytic mechanism, the in-situ Raman study of the catalysts activation (reduction) process, the isolated CO and CO2 methanation...
Uploaded on: December 5, 2022 -
March 22, 2018 (v1)Publication
Rh/MnO2-CeO2/Al2O3 catalysts with different manganese-to-ceria ratios have been synthesized, characterized and tested in CO-PrOx reaction. The physicochemical properties of the solids were studied by XRD, Raman spectroscopy, BET surface area, H2-TPR, TGA-DTG and TEM. The differences observed in the textural, structural and redox properties were...
Uploaded on: March 27, 2023 -
February 26, 2018 (v1)Publication
Ceria-based gold catalysts were successfully deposited on ferritic stainless steel (Fecralloy) and aluminium monoliths. The prepared monolithic and reference powder catalysts were characterized by means of S BET, X-ray diffraction, glow discharge optical emission spectroscopy and scanning electron microscopy-energy dispersive X-ray analysis...
Uploaded on: March 27, 2023 -
April 14, 2023 (v1)Publication
Active and selective structured RuO2/Al2O3 catalysts for CO methanation using a flow simulating CO2-rich reformate gases from WGS and PROX units (H2 excess, CO2 presence and 300 ppm CO concentration) were prepared. Both, the RuO2/Al2O3 powder and the slurry prepared from it for its structuration by washcoating of the metallic micromonolithic...
Uploaded on: April 15, 2023 -
April 9, 2018 (v1)Publication
Platinum and gold structured catalysts were compared as active phases in classical and O2-assisted Water Gas Shift (WGS) reaction. Both metals were supported on iron-doped ceria mixed oxide and then, structured on metallic micromonolithic devices. As expected the WGS activity of both micromonoliths is conditioned by the nature of the noble...
Uploaded on: March 27, 2023 -
November 16, 2018 (v1)Publication
This work is devoted to the development of novel structured catalytic system for WGS reaction. The new concept is related to the presence of a pre-catalytic "buffer" layer formed by WGS-inert oxide, i.e. not involved in CO conversion, but able to increase the number of participating sites in water dissociation step during the reaction. The...
Uploaded on: March 27, 2023 -
June 30, 2023 (v1)Publication
This work shows a new method for the preparation of 100% carbon-structured devices. The method is based on resorcinol-formaldehyde polymerization, using starch as a binder with the addition of a certain amount of external carbon source before polymerization. Molds obtained by 3D printing are used to shape the structured devices in the desired...
Uploaded on: July 1, 2023 -
September 23, 2024 (v1)Publication
The active forms of Au and Pt in CeO2-based catalysts for the water-gas shift (WGS) reaction are an issue that remains unclear, although it has been widely studied. On one hand, ionic species might be responsible for weakening the Ce-O bonds, thus increasing the oxygen mobility and WGS activity. On the other hand, the close contact of Au or Pt...
Uploaded on: September 24, 2024 -
May 8, 2023 (v1)Publication
Selective CO methanation from H2-rich stream has been regarded as a promising route for deep removal of low CO concentration and catalytic hydrogen purification processes. This work is focused on the development of more efficient catalysts applied in practical conditions. For this purpose, we prepared a series of catalysts based on Ru supported...
Uploaded on: May 10, 2023