PÉREZ MAQUEDA , Luis Allan

In this paper we show the performance of a new CO2sorbentconsisting of a dry physical mixture of a Ca-based sorbent and a SiO2nanostructuredpowder. Thermo-gravimetric analysis (TGA) performed at conditions close to the Ca-looping process demonstrate that the rate of CO2capture by the mixture is enhancedduring the fast carbonation stage of...

The multicyclic carbonation/calcination (c/c) of CaO solid particles at high temperature is at the basis of the recently emerged Calcium-looping (CaL) technology, which has been shown to be potentially suitable for achieving high and sustainable post-combustion CO2 capture efficiency. Despite the success of pilot plant projects at the MWth...

This work presents a CO2 sorbent that may be synthesized from low-cost and widely available materials following a simple method basically consisting of impregnation of a nanostructured silica support with a saturated solution of calcium nitrate. In a first impregnation stage, the use of a stoichiometric CaO/SiO2 ratio serves to produce a...

The Ca-looping (CaL) process, based on the multicyclic carbonation/ calcination of limestone derived CaO, has emerged recently as a potentially economically advantageous technology to achieve sustainable postcombustion and precombustion CO2 capture efficiencies. Yet, a drawback that hinders the efficiency of the CaL process is the drastic drop...

This paper reports on the accuracy of the integral methods used for the kinetic analysis of degradation and crystallization of polymers. Integral methods are preferred by many authors over the differential ones because often the experimental data obtained, such as thermal degradation studied by thermogravimetry, are integral and the...

The Ca-looping (CaL) technology is already recognized as a potentially viable method to capture CO2 from postcombustion gas in coal fired power plants. In this process, CO2 is chemisorbed by CaO solid particles derived from precalcination of cheap and widely available natural limestone. The partially carbonated solids are regenerated by...

A critical study of the use of isoconversional methods for the kinetic analysis of non-isothermal data corresponding to processes with either a real or an apparent variation of the activation energy, E, with the reacted fraction, α, has been carried out using for the first time simulated curves. It has been shown that the activation energies...

An enhanced general analytical equation has been developed in order to evaluate the kinetic parameters of the thermal degradation of nanocomposites, composed of poly(lactic acid) (PLA) and organo-modified montmorillonite (OMMT) nanoparticles. This improvement has consisted of replacing the n-order conversion function by a modified form of the...

The dependence of the preexponential factor on the temperature has been examined and the errors involved in the activation energy calculated from isothermal and non-isothermal methods without considering such dependence have been estimated. It has been shown that the error in the determination of the activation energy calculated ignoring the...

In this work, we analyze limestone calcination kinetics at environmental conditions involving a CO2 partial pressure P close to the equilibrium pressure Peq by means of in situ X-ray diffraction (XRD) and thermogravimetric (TG) analyses. In contrast with previous empirical observations carried out mostly at conditions far from equilibrium...

Even though an increasing number of pilot-scale plants are demonstrating the potential efficiency of the Ca-looping technology to capture CO2 at a commercial level, a still standing matter of concern is the loss of carbonation reactivity of the regenerated CaO by calcination, which is expected to be particularly marked at realistic conditions...

The dynamic heating rate method developed by TA Instruments ( Hi-Res ™ ) is a kind of sample controlled thermal analysis in which a linear relati onship between the logarith m of the heating rate and the rate of weight change is imposed. It is s hown in this paper that the reacted fraction at the maximum ...

The low cost and wide availability of natural limestone (CaCO3) is at the basis of the industrial competitiveness of the Ca-looping (CaL) technology for postcombustion CO2 capture as already demonstrated by ~1Mwt scale pilot projects. A major focus of studies oriented towards further improving the efficiency of the CaL technology is how to...

The integral methods are extensively used for the kinetic analysis of solid-state reactions. As the Arrhenius integral function [p(χ)] does not have an exact analytical solution, different approximated equations have been proposed in the literature for performing the kinetic analysis of experimental integral data. Since the first approximation...

We analyze the role of limestone crystallinity on its CO2 capture performance when subjected to carbonation/calcination cycles at conditions mimicking the Ca-looping (CaL) technology for postcombustion CO 2 capture. The behavior of raw and pretreated limestones (milled and thermally annealed) is investigated by means of thermogravimetric...

Limestone derived CaO conversion when subjected to multiple carbonation/calcination cycles is a subject of interest currently fueled by several industrial applications of the so-called Ca-looping (CaL) technology. The multicyclic CaO conversion at Ca-looping conditions exhibits two main features as demonstrated by thermogravimetric analysis...

Influence of added thermal resistance on crystallization kinetics, as measured by differential scanning calorimetry (DSC), of the Se70Te30 glass was studied. The increase of thermal resistance was achieved by adding polytetrafluorethylene discs of different thicknesses (up to 0.5 mm) in-between the DSC platform and the pan with sample. Increase...

Influence of added thermal resistance on crystallization kinetics, as measured by differential scanning calorimetry (DSC), of the Se70Te30 glass was studied. The increase of thermal resistance was achieved by adding polytetrafluorethylene discs of different thicknesses (up to 0.5 mm) in-between the DSC platform and the pan with sample. Increase...

Thermochemical energy storage (TCES) is considered as a promising technology to accomplish high energy storage efficiency in concentrating solar power (CSP) plants. Among the various possibilities, the calcium-looping (CaL) process, based on the reversible calcination-carbonation of CaCO stands as a main candidate due to the high energy density...

CO2 capture and storage (CCS) is considered as a key strategy in the short to medium term to mitigate global warming. The Calcium-Looping process, based on the reversible carbonation/calcination of CaO particles, is a promising technology for post-combustion CO2 capture because of the low cost and non-toxicity of natural CaO precursors and the...