SERRANO GOTARREDONA , María Teresa

This paper considers the viability of compact low-resolution low-power mini digital-to-analog converters (mini-DACs) for use in large arrays of neural type cells, where programmable weights are required. Transistors are biased in weak inversion in order to yield small currents and low power consumptions, a necessity when building large size...

No description

This paper presents the design and simulation of a serial AER LVDS communication link. It converts data from classical AER parallel bus with a 4-phase handshaking protocol into a bit stream which is transmitted serially into a single LVDS wire. At the receiver side data from the LVDS cable are transformed back to a parallel AER bus and...

We present a 32 32 pixels contrast retina microchip that provides its output as an address event representation (AER) stream. Spatial contrast is computed as the ratio between pixel photocurrent and a local average between neighboring pixels obtained with a diffuser network. This current-based computation produces an important amount of...

We present a contrast retina microchip that provides its output as an AER (Address Event Representation) stream. Contrast is computed as the ratio between pixel photocurrent and a local average between neighboring pixels obtained with a diffusive network. This current based computation produces a large mismatch between neighboring pixels,...

We present a neuromorphic cortical-layer processing microchip for address event representation (AER) spike-based processing systems. The microchip computes 2-D convolutions of video information represented in AER format in real time. AER, as opposed to conventional frame-based video representation, describes visual information as a sequence of...

Address-Event-Representation (AER) is a communications protocol for transferring (visual) information between chips, originally developed for bio-inspired vision and audition systems. Such systems may consist of a complicated multi-layer hierarchical structure with many chips that transmit events among them in real time, while performing some...

In this paper a bio-inspired six-layer convolutional network (ConvNet) non-frame based for digit recognition is shown. The system has been trained with the backpropagation algorithm using 32x32 images from the MNIST database. The system can be implemented with already physically available spike-based electronic devices. 10000 images have been...

In this paper we briefly summarize the fundamental properties of spike events processing applied to artificial vision systems. This sensing and processing technology is capable of very high speed throughput, because it does not rely on sensing and processing sequences of frames, and because it allows for complex hierarchically structured...

In this paper we briefly summarize the fundamental properties of spike events processing applied to artificial vision systems. This sensing and processing technology is capable of very high speed throughput, because it does not rely on sensing and processing sequences of frames, and because it allows for complex hierarchically structured...

In this paper we propose the first bio-inspired sixlayer convolutional network (ConvNet) non-frame based that can be implemented with already physically available spikebased electronic devices. The system was designed to recognize people in three different positions: standing, lying or up-sidedown. The inputs were spikes obtained with a motion...

Spike-based processing technology is capable of very high speed throughput, as it does not rely on sensing and processing sequences of frames. Besides, it allows building complex and hierarchically structured cortical-like layers for sophisticated processing. In this paper we summarize the fundamental properties of this sensing and...

In this paper we briefly summarize the fundamental properties of spikes processing applied to artificial vision systems. This sensing and processing technology is capable of very high speed throughput, because it does not rely on sensing and processing sequences of frames, and because it allows for complex hierarchically structured...

This paper presents a circuit design technique suitable for the realization of winner-take-all (WTA), maximum (MAX), looser-take-all (LTA), and minimum (MIN) circuits. The technique presented is based on current replication and comparison. Traditional techniques rely on the matching of an N transistors array, where N is the number of system...

No description

Recently, a real-time clustering microchip neural engine based on the ART1 architecture has been reported. Such chip is able to cluster 100-b patterns into up to 18 categories at a speed of 1.8 μs per pattern. However, that chip rendered an extremely high silicon area consumption of 1 cm2, and consequently an extremely low yield of 6%....

This article reports on two databases for event-driven object recognition using a Dynamic Vision Sensor (DVS). The first, which we call Poker-DVS and is being released together with this article, was obtained by browsing specially made poker card decks in front of a DVS camera for 2–4 s. Each card appeared on the screen for about 20–30 ms. The...

This paper presents a modification to the original ART 1 algorithm (Carpenter and Grossberg, 1987a, A massively parallel architecture for a self-organizing neural pattern recognition machine, Computer Vision, Graphics, and Image Processing, 37, 54–115) that is conceptually similar, can be implemented in hardware with less sophisticated building...

A new method to implement an arbitrary piece-wise-linear characteristic in current mode is presented. Each of the breaking points and each slope is separately controllable. As an example a block that implements an N-shaped piece-wise-linearity has been designed. The N-shaped block operates in the subthreshold region and uses only ten...

In this paper, we show and validate a reliable circuit design technique based on source voltage shifting for current-mode signal processing down to femtoamperes. The technique involves specific-current extractors and logarithmic current splitters for obtaining on-chip subpicoampere currents. It also uses a special on-chip sawtooth oscillator to...

A new operational transconductance amplifier-capacitor (OTA-C) based sinusoidal voltage-controlled oscillator (VCO) has been designed and fabricated, the oscillation frequency of which can be tuned from 74 mHz to 1 MHz. The VCO uses a new OTA whose transconductance is adjusted by using a set of special current mirrors. These current mirrors...

Memristive devices are a promising technology to implement dense learning synapse arrays emulating the high memory capacity and connectivity of biological brains. Recently, the implementation of STDP learning in memristive devices connected to spiking neurons have been demonstrated as well as the dependency of the form of the learning rule on...